Apeks TX50 for stage or pony

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Old DST = one 1/2" lp + 3 x 3/8" lp ports.
For any old Apeks 1st stage I would love to see the inside of the HP chamber. The orifice is irreplaceable unlike its stable mate FSR.
The individual part numbers for the DIN connection:
AP1409.....0-ring
AP1472.....Conical filter
AP1470.....Handwheel, 300 Bar
AP1471.....Handwheel connector
AP1166.....O-ring

Only 3 lp ports?
 
Ha Ha you missed the 1/2" lp port!!!!
Anyway I hate those 1/2" lp port in my DST and FSR.
Well at least Apeks had done away that stupid design.

Agree, not big on them at all. On my cousteaus I did use the Apeks 1/2 adapter as at least it's low profile.
 
Partnumber you're looking for is AP0211
AP0211.jpg
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom