tiburonarizona
Registered
Looking for recommendations/opinions about "narrow" wings which minimize wobble and don't need single tank adapters. I've noticed some wing designs are "narrow" i.e. hugs the tank, whereas others appear to be flatter and wider (i.e. Dive RIte), and looks like they would benefit from a STA. I'm leaning towards Hollis LX, Oxycheq Mach V, VDH Argonaut, DGX S1 and the like and staying away from Dive Rite, OMS, HOG, (and Halcyon because of price).
I'm relatively small - 5'2" 115 pounds so want the lowest profile per amount of lift, if that makes sense. Obviously a 30# wing will be larger than an 18# wing, but different manufacturers design their wings differently to minimize volume and drag, that's what I'm hoping folks will chime in with - their experience with wings that are lower profile per amount of lift.
90% of my diving is warm water (generally use 3mm full wetsuit + 2.5 mm hood + sometimes 2.5 mm vest), so hoping to get buy with an 18# lift, but can go up to 25# or even 30# if warranted. AL backplateplate, brand TBD.
Thanks
I'm relatively small - 5'2" 115 pounds so want the lowest profile per amount of lift, if that makes sense. Obviously a 30# wing will be larger than an 18# wing, but different manufacturers design their wings differently to minimize volume and drag, that's what I'm hoping folks will chime in with - their experience with wings that are lower profile per amount of lift.
90% of my diving is warm water (generally use 3mm full wetsuit + 2.5 mm hood + sometimes 2.5 mm vest), so hoping to get buy with an 18# lift, but can go up to 25# or even 30# if warranted. AL backplateplate, brand TBD.
Thanks