Cressi Digi 2

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

How long is a HP hose attached to Digi 2?

I consider buing the console (I would use it as backup device - like my "Digital 330" minus average depth plus precise pressure readings for tracking my RMV - yes, I'm an engineer and I like numbers :) ), but if the hose is too long - it would not fit my "DIR" configuration (currently my HP hose is 65cm / 2ft 1.5in long). I don't like have it dangling on my side.

I have read the manual (https://www.cressi.com/easyUp/file/instructions/E190L894-Manuale_DIGI2_EN.pdf) and it says "It is strictly prohibited to replace the hose originally assembled on the DIGI 2 console with another of a different type or model. Doing so will immediately void the warranty.".

But... is device HP socket same as in analog gauge? Will my current HP hose fit it (if I decide to take a risk and replace the hose anyway)?

Woops.
 
After a few trips with the Digi 2 I have to say it is a dandy little piece of unnecessary technology. Looks good, though. And don't believe the ******** that it is luminescent. nope. Still cool, though.
 
After a few trips with the Digi 2 I have to say it is a dandy little piece of unnecessary technology. Looks good, though. And don't believe the ******** that is is luminescent. nope. Still cool, though.

All SPG's are unnecessary technology let's go back the the J valve.
 

Back
Top Bottom