Cressi Digi 2

[BoundForElsewhere]

How long is a HP hose attached to Digi 2?

I consider buing the console (I would use it as backup device - like my "Digital 330" minus average depth plus precise pressure readings for tracking my RMV - yes, I'm an engineer and I like numbers ), but if the hose is too long - it would not fit my "DIR" configuration (currently my HP hose is 65cm / 2ft 1.5in long). I don't like have it dangling on my side.

I have read the manual (https://www.cressi.com/easyUp/file/instructions/E190L894-Manuale_DIGI2_EN.pdf) and it says "It is strictly prohibited to replace the hose originally assembled on the DIGI 2 console with another of a different type or model. Doing so will immediately void the warranty.".

But... is device HP socket same as in analog gauge? Will my current HP hose fit it (if I decide to take a risk and replace the hose anyway)?

Woops.

 

[Blackcrusader]

How long is a HP hose attached to Digi 2?

Mine is still in it's package so will let you know. Just use your existing hose if your hose length is an issue.

 

[BoundForElsewhere]

After a few trips with the Digi 2 I have to say it is a dandy little piece of unnecessary technology. Looks good, though. And don't believe the ******** that it is luminescent. nope. Still cool, though.

 

[Blackcrusader]

After a few trips with the Digi 2 I have to say it is a dandy little piece of unnecessary technology. Looks good, though. And don't believe the ******** that is is luminescent. nope. Still cool, though.

All SPG's are unnecessary technology let's go back the the J valve.