FishWatcher747
Contributor
This came up in another discussion. A diver gets on a dive boat and is assigned 2 tanks for 2 dives. So he checks both tank pressures and takes the tank with more gas on first deep dive and the one with less gas on second shallow dive. I would like to start doing this as 3400 PSI vs 2800 can be a big difference in bottom time.
So you hook up your Reg set on each tank and turn on the gas and check pressure.
My question is do I need to hook up the hose to the BC to do this? I want to know before I make a scene on the boat if I am doing it wrong.
So you hook up your Reg set on each tank and turn on the gas and check pressure.
My question is do I need to hook up the hose to the BC to do this? I want to know before I make a scene on the boat if I am doing it wrong.