DIY Regulator Maintenance Discussion: Aqualung

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I have some old US diver octopus 2nd stages and 1 of my diaphragms is torn. I'm having trouble locating a replacement diaphragm. Any advice?
 
Wow...over 10,000 views, Thanks for reading everyone!
 
This is an excellent thread. Glad to see someone doing this for the Aqualung regs. I've been looking at a lot of Scubapro o'ring sizes and I have to say there's not nearly as much info on here for the Aqualung o'rings. So I went through and took all the part numbers from the 2006 parts manual and put it into Excel and made a list of o'rings that go into all the first and second stage regs. I've populated as much info as I could find on the board and I'll post it here. Then, if you guys have any more updates to add to this, I will update and post it again. I would like to finish my excel file with all the parts numbers and a cross referece by part number to all regulators that a specific part will fit. So if you have measured any of these o'rings and would like to contribute, please do.

AL Part|ASE #|MC Part# |Notes
125915 | | |
820007 | BS-611 | |
820008 | | |
820009 | | |
820010 | 2-010 | 9464K15 |
820011 | 2-011 | 9464K16 |O-ring, LP Port, Yoke retainer to body
820013 | | |
820014 | | |
820015 | 2-015 | 9464K21 |
820016 | | |
820017 | | |
820038 | ?? | 1.9x7.2 | Crown o-ring
820039 | | |
820062 | | |
820072 | | |O-ring, HP Port
820077 | | |
820080 | 2-006 | 9464K11 |
820088 | | |
820094 | 2-013 | 9464K18 |Din to Valve o-ring, Dust Cap o-ring
820120 | 2-014 | 9464K19 |
820314 | | |
820322 | | |
824006 | | |Balance chamber w/out DRY Kit
820080 | | |Balance chamber o-ring for dry kit
824407 | ?? | 2.0x11 |HP Plug O-ring
957004 | BS-611 | |British Std Extended Series HP plug
957004 | 2-010 | 9464K15 |May be used instead of BS-611 above
957025 | | |
AP1438 | 2-019 |9464K73 |
AP2041 | BS-606 | |British Standard Extended Series

I am planning on tearing apart my Titan 1st stage in the next two weeks or so. I will be able to see what size o-ring is in the balance chamber. Not sure if it will be an 824006 or a 820080. The diagram I have for the Titan, dated 1999, shows these two part numbers, the first balance chamber o-ring without the dry kit, the second for with the dry kit. Not sure why the dry kit would change that. And then if we needed more confusion, the 2006 parts catalog doesn't show two parts numbers, just one - 82008. Spring block is the same part number both diagrams. So maybe they decided they only needed the 820080? Maybe they're the same size o-ring and just different duro?

I also have two Cousteau-SEA 1st stages I'm going to tear apart. I should be able to take measurements for an 820013, 820014, measure and check 820080 against the balance chamber o-ring from the Titan 1st stage, check my 824407 vs. what was posted in this thread earlier, and just have a good time with it.

Attached to the Cousteau-SEA I have a non-adjustable Micra and that hase some o-rings I can measure too. It has an 820016, 820314, and a 957025 to help fill in some more measurements for this list. If you have any of these and want to help out and check my numbers, it would be greatly appreciated.

Bruce
 
Last edited:
Hi all,

I have several Conshelf regulators (XII, XIV, 14, 21, SE2), and I overhaul/repair all of these regulators by myself. I learn to repair it from this thread & Conshelf tech. manual. :D

Do you know where I can find online scuba shop who sell Conshelf dry kit (PN 100525) and willing to send it to South East Asia? Hopefully I can get it with great price.
 
This is an excellent thread. Glad to see someone doing this for the Aqualung regs. I've been looking at a lot of Scubapro o'ring sizes and I have to say there's not nearly as much info on here for the Aqualung o'rings. So I went through and took all the part numbers from the 2006 parts manual and put it into Excel and made a list of o'rings that go into all the first and second stage regs. I've populated as much info as I could find on the board and I'll post it here. Then, if you guys have any more updates to add to this, I will update and post it again. I would like to finish my excel file with all the parts numbers and a cross referece by part number to all regulators that a specific part will fit. So if you have measured any of these o'rings and would like to contribute, please do.

AL Part|ASE #|MC Part# |Notes
125915 | | |
820007 | BS-611 | |
820008 | | |
820009 | | |
820010 | 2-010 | 9464K15 |
820011 | 2-011 | 9464K16 |O-ring, LP Port, Yoke retainer to body
820013 | | |
820014 | | |
820015 | 2-015 | 9464K21 |
820016 | | |
820017 | | |
820038 | ?? | 1.9x7.2 | Crown o-ring
820039 | | |
820062 | | |
820072 | | |O-ring, HP Port
820077 | | |
820080 | 2-006 | 9464K11 |
820088 | | |
820094 | 2-013 | 9464K18 |Din to Valve o-ring, Dust Cap o-ring
820120 | 2-014 | 9464K19 |
820314 | | |
820322 | | |
824006 | | |Balance chamber w/out DRY Kit
820080 | | |Balance chamber o-ring for dry kit
824407 | ?? | 2.0x11 |HP Plug O-ring
957004 | BS-611 | |British Std Extended Series HP plug
957004 | 2-010 | 9464K15 |May be used instead of BS-611 above
957025 | | |
AP1438 | 2-019 |9464K73 |
AP2041 | BS-606 | |British Standard Extended Series

I am planning on tearing apart my Titan 1st stage in the next two weeks or so. I will be able to see what size o-ring is in the balance chamber. Not sure if it will be an 824006 or a 820080. The diagram I have for the Titan, dated 1999, shows these two part numbers, the first balance chamber o-ring without the dry kit, the second for with the dry kit. Not sure why the dry kit would change that. And then if we needed more confusion, the 2006 parts catalog doesn't show two parts numbers, just one - 82008. Spring block is the same part number both diagrams. So maybe they decided they only needed the 820080? Maybe they're the same size o-ring and just different duro?

I also have two Cousteau-SEA 1st stages I'm going to tear apart. I should be able to take measurements for an 820013, 820014, measure and check 820080 against the balance chamber o-ring from the Titan 1st stage, check my 824407 vs. what was posted in this thread earlier, and just have a good time with it.

Attached to the Cousteau-SEA I have a non-adjustable Micra and that hase some o-rings I can measure too. It has an 820016, 820314, and a 957025 to help fill in some more measurements for this list. If you have any of these and want to help out and check my numbers, it would be greatly appreciated.

Bruce
Hi Bruce,

Were you able to find some more data for your table? I'm searching for the diameter of "820088". Do you have an idea?

Thanks
 
Hi Bruce,

Were you able to find some more data for your table? I'm searching for the diameter of "820088". Do you have an idea?

Thanks
820088 measures out as a 1.5mmCS x 15.0mmID that feels a little stiff, like a Duro 85.
 

Back
Top Bottom