Scubaroo
Contributor
Anyone know where I can buy one of these online? I've tried the usual online places, and a couple of LDS, but none have them.
1/2" plug for Apeks
- Thread starter Scubaroo
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
raxafarian
Contributor
a seaquest/apeks dealer should be able to order them. Part numbers are: AP1487 for the plug & AP1410 for the o-ring... don't know if that helps... if not, I could check on getting them from the shop where I got mine from and mail 'em to ya.
www.fifthd.com ?
It won't be listed on the web site of course but you can email or phone them... they have had them in the past.
It won't be listed on the web site of course but you can email or phone them... they have had them in the past.
I have a whole pile of plugs that my LDS gave me when I asked for ONE 
They take so many out when they put the octo, LP inflator hose and SPG on a 1st stage that they end up throwing many away.
As a side effect, it's a cheap way of getting spare O rings, too!
The problem is that rarely do 1st stages come in with 1/2 plugs, so they're much rarer. You can also try a Dacor dealer, I think Dacor used to have a 1/2 port too.
Roak
They take so many out when they put the octo, LP inflator hose and SPG on a 1st stage that they end up throwing many away.
As a side effect, it's a cheap way of getting spare O rings, too!
The problem is that rarely do 1st stages come in with 1/2 plugs, so they're much rarer. You can also try a Dacor dealer, I think Dacor used to have a 1/2 port too.
Roak
FredT
Guest
Parker fluid conn part # 05CP-5C will work, and should be available from any Parker hose or hydraulic valve distributor.
FT
FT
OP
Scubaroo
Contributor
Found a generic 1/2" plug at http://www.diversdiscount.com - going to get a couple. Tried a few LDS - all they had were the 3/8" variety.
BlueDolphin
Guest
I had another brand plug continue to blow out the o-ring on an APEKS first stage. I would go with one from APEKS only. JMO.
Similar threads
