Advice on deco reg set

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I orient it to the bottom of the first stage to protect it.
 
Re the Xtras:

I happened to visit the store in Florida when they were about to announce the Xtra’s. The short summary is they got frustrated with the slow service from Deep6, and decided to do it on their own. I was at the time using Mk25/G260 regs, and honestly with the exception of an auto closing feature on the DIN added to the Xtra, they seem identical. I own about a half dozen sets now for bailout / deco / stage, and have never had a real issue. The only thing to know is you have to occasionally tighten the end of the DIN adapter as it will work itself lose over time (just shove an Allen wrench in the open end of the reg and tighten it, it’s easy to see if it’s loosened).
This is very good way to ruin the o-ring and the DIN retainer and housing. Torque it properly to specs and don't try to the use the reg body as a wrench by turning it when pressurized and you won't see this happen to any real extent.
 
Buy what matches your backgas regs.
All regs except titanium ones can be o2 cleaned.
I agree, all my regs match and are interchangeable. However, while titanium regs can be O2 cleaned one probably does not want to use them for O2 service.
 
http://cavediveflorida.com/Rum_House.htm

Back
Top Bottom