I am looking into the Apeks setting tools to adjust the lever height in second stages, the AT68 for ATX and the AT69 for TX regulators. They are not cheap but nothing is cheap in the diving world but each regulator family seems to have its own.
In the end all the tool does is to check the depression length of the purge button. Does someone know the actual gas flow/no gas flow distances for each tool/regulator? Are the distances different enough that they can be measured with a caliper?
It is obviously easier to use the tool as it will settle in exactly the right spot but a caliper measurement should be close enough. Or am I missing something?
Cheers
Jordi
In the end all the tool does is to check the depression length of the purge button. Does someone know the actual gas flow/no gas flow distances for each tool/regulator? Are the distances different enough that they can be measured with a caliper?
It is obviously easier to use the tool as it will settle in exactly the right spot but a caliper measurement should be close enough. Or am I missing something?
Cheers
Jordi