BigRed96
Contributor
I recently acquired a Titan first stage. As I tore into it to rebuild it I noticed it’s missing the Teflon adjustment spring washer. Is it imperative to have this washer or can I go without it? On the schematic it’s part #28.
Conshelf/Titan First Stage question
- Thread starter BigRed96
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
I have several Conshelf 1sts without it... Early models didn't have it to start with.
Respectfully
James
Respectfully
James
OP
BigRed96
Contributor
Just happened to be on SB when you posted. I believe preferred method is to have the washer, but I wouldn't worry about it's absence either.
Respectfully
James
Respectfully
James
Similar threads
