DiveNav has closed

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I use this inexpensive regulator for calibration with 17l cylinders:
upload_2020-1-14_12-43-52.png


and I have this plumbed in on my compressor that is used to feed the meter and them my monitor device at the correct flow rate:

https://www.amazon.com/gp/product/B009PAS4W2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

A couple hospital tubing quick connects lets me then plumb it so the flow meter can feed calibration gas for service.

Fairly inexpensive IMHO.

YMMV
 
my reference gasses come from CalGasDirect. The HAZMAT fee is minor as I distribute that cost over a number of different cylinders as I do 2 point calibrations, and will also test with another reference gas...

YMMV
 
I use this inexpensive regulator for calibration with 17l cylinders:
View attachment 561427

and I have this plumbed in on my compressor that is used to feed the meter and them my monitor device at the correct flow rate:

https://www.amazon.com/gp/product/B009PAS4W2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

A couple hospital tubing quick connects lets me then plumb it so the flow meter can feed calibration gas for service.

Fairly inexpensive IMHO.

YMMV
https://www.amazon.com/Gasco-CV-2-Calibration-Control-Valve/dp/B01F2BNWD8
 
The reason for the Dwyer flow meter is that the Sensorcon requires a different flow rate than the CooTwo/NitroxBuddy for use and calibration. Neither of which is obtainable with the dive product flow reducers (I use the OxyCheq DIN).

YMMV
 
The reason for the Dwyer flow meter is that the Sensorcon requires a different flow rate than the CooTwo/NitroxBuddy for use and calibration. Neither of which is obtainable with the dive product flow reducers (I use the OxyCheq DIN).

YMMV
does that mean the canister thingy that I got from Oxycheq won't work to calibrate my CooTwo?
 
Thanks for helping to round out the details. I don't have CO/O2 meters but use some of these things in my day job so wanted to make sure that everyone is aware of additional items needed for their specific meter and cal gas tank combo.

@tursiops that rotometer should work as a less expensive alternate.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom