Just did a replacement set of dry gloves and thought I would post,I will make one more pair for a pal.
Get seal from e-bay less than $15.00 per pair for nice seals-Zeroviz53 @ E-Bay,
can of Glue =clear, Gloves from farmhardware.com = Atlas PVC glove's the cheapest I have found / also at Amazon.com
1. trim glove down about 1" off wrist ,slide glove and seal, I soap seal a bit.
on soda bottle 2 littre, roll back seal about 1" and clean and glue per glue can label.
2. let dry so its not tacky roll seal onto glove and tape with a wrap or two of masking tape to add pressure.
3.let dry overnight and if you like you can mix a bit of aqua seal and lay a bead around outside edge but you dont need to if glued right.
cotton linner is cheap from like k-mart
about $17-$18 for dry gloves and they work nice and hold up GREAT!
Get seal from e-bay less than $15.00 per pair for nice seals-Zeroviz53 @ E-Bay,
can of Glue =clear, Gloves from farmhardware.com = Atlas PVC glove's the cheapest I have found / also at Amazon.com
1. trim glove down about 1" off wrist ,slide glove and seal, I soap seal a bit.
on soda bottle 2 littre, roll back seal about 1" and clean and glue per glue can label.
2. let dry so its not tacky roll seal onto glove and tape with a wrap or two of masking tape to add pressure.
3.let dry overnight and if you like you can mix a bit of aqua seal and lay a bead around outside edge but you dont need to if glued right.
cotton linner is cheap from like k-mart
about $17-$18 for dry gloves and they work nice and hold up GREAT!