Dome port for Olympus 8mm f1.8 fisheye

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

rs86

Registered
Messages
54
Reaction score
8
# of dives
200 - 499
Hi all,

I am torn between two options for the Olympus m.zuiko 8mm f1.8 fisheye lens in a Nauticam housing:

- Nauticam 140mm glass fisheye dome port
- Zen 170mm glass dome port

I am planning on shooting quite a bit of over-under, so the 170mm port would be better, but I am wondering if I would get the full 180 degree FOV with this dome.

Also, with the Zen dome, would I need an extension ring with this lens? I can't find any information about this...

Thanks for your advice!
 
I shot the 8mm in the 140mm FE dome recently in Mexico with my EM1 MKII. Usually I've used the smaller acrylic, or glass Oly dome port. I thought the edges and corners looked much better, although this shot doesn't really show it, the quality is good. You need an N85 17mm extension as well. It's not that much larger to swim with either.

32907639913_9aec3bb403_o.jpg
 
https://www.shearwater.com/products/teric/

Back
Top Bottom