this is per an email sent on 11-07-07:
At 118* 19' 28.69W & 33* 20' 58.78N Depth of approx 51.5' there is a Red sprite image that is not an info marker and holds no value in the area. I dont know if this was to be made into something or not but its out of place, in the wire frame mode it shows as a red line at a 45* angle in the plain of view.
Also are you planning on making users able to determine Dive Weight values and BCU Fill values in Imperial weights increments, I do not know the Metric system avidly and I think some other users will have ease in using if all forms of measurement are both in Metric and Imperial.
How is Visibility determined by the program? Does it vary based on real time elements? Is there plans to make it possible to adjust these values? Are you planning on adding features to allow users to preform Night dives at these locations as well?
Also I cannot travel on the surface of the water to get to a specific Dive location, I wanted to drop down on the Suejac from the second to last buoy as I would do in real fashion but surface travel is not working? or not integrated into the program from what I can tell from my first series of dives.
Currently I think the rendering and images are a very good beginning. Casino Point needs more Kelp, as well as images and detailed info for some of the markers located there. But a very nice series
Do you plan on adding the location of the Valiant which is located just outside of Casino Point off of the Beach? I am not sure to the N.E.W.S. Location but from the stairway it is roughly below the third Buoy to the left Outside of the park at a depth of 90-100 feet
Anything Else I find I shall report as they are discoverd
At 118* 19' 28.69W & 33* 20' 58.78N Depth of approx 51.5' there is a Red sprite image that is not an info marker and holds no value in the area. I dont know if this was to be made into something or not but its out of place, in the wire frame mode it shows as a red line at a 45* angle in the plain of view.
Also are you planning on making users able to determine Dive Weight values and BCU Fill values in Imperial weights increments, I do not know the Metric system avidly and I think some other users will have ease in using if all forms of measurement are both in Metric and Imperial.
How is Visibility determined by the program? Does it vary based on real time elements? Is there plans to make it possible to adjust these values? Are you planning on adding features to allow users to preform Night dives at these locations as well?
Also I cannot travel on the surface of the water to get to a specific Dive location, I wanted to drop down on the Suejac from the second to last buoy as I would do in real fashion but surface travel is not working? or not integrated into the program from what I can tell from my first series of dives.
Currently I think the rendering and images are a very good beginning. Casino Point needs more Kelp, as well as images and detailed info for some of the markers located there. But a very nice series
Do you plan on adding the location of the Valiant which is located just outside of Casino Point off of the Beach? I am not sure to the N.E.W.S. Location but from the stairway it is roughly below the third Buoy to the left Outside of the park at a depth of 90-100 feet
Anything Else I find I shall report as they are discoverd