scubakevinp
Registered
Last time I we diving my Scubapro MK25SA/S600 regulator started honking when I exhaled and my wife Smart Tec dive computer was flashing "bat" where the PSI is displayed. The manual says this means the wireless transmitter battery is low. I took both sets of our equipment into our local shop where we purchases the gear 1 year and 8 months ago. We had it serviced 1 year ago and it was not due for another 4 months. I told them since I bought both ( mine and my wifes) of the Smart Tec computers/transmitters at the same time and 1 was saying low transmitter battery they should have both changed. We have about 160 dives on our equipment over 20 months and if 1 has a low battery the other can not be far behind. When I picked the gear up today they had done the annual service on the gear. I asked about the battery and they told me it had a 10 year life and it could not be low. I showed the the low battery display and the acted as it was nothing to worry about, but I might want to send it in to Scubapro myself. The I asked for a tank and connected myy reg, it still honked. They proceed to explain it was because it was not in the water, I connected my wifes and it made no sound. Then he rubbed some silicon grease on the small diapham in my reg and tried to say it was OK. He did not have a new part but said it was nothing to worry about. It still makes the honking noise.
I took this gear in and ended up paying for the annual service yet I still have the same 2 problems I had a month ago when I took it in to the shop. We are going on a 10 day dive trip in 3 week and I am not very comfotable with the condition of my gear.
I guess I will try to contact ry to contact Scubapro direct and see if I can send it to them direct to them for repair.
Any comments or feedback are welcomed.
I took this gear in and ended up paying for the annual service yet I still have the same 2 problems I had a month ago when I took it in to the shop. We are going on a 10 day dive trip in 3 week and I am not very comfotable with the condition of my gear.
I guess I will try to contact ry to contact Scubapro direct and see if I can send it to them direct to them for repair.
Any comments or feedback are welcomed.