Naboodiver
Contributor
Zak,
I downloaded and installed new DiveOrganizer Version 1.8.9.1337. The following are still bugs noted by me and others. The good news is one of the prior bugs is now fixed and that is the weight - it is now correct on the database and in the Diver TAB. Yes !!
Bugs unfixed and still in version 1.8.9.1337:
Under the Database drop down:
- Height on the Diver input height of 5.6 (5'6") converts to 7 ft on save (still not converting correctly).
- May I suggest that the height should be split into two fields one for feet and one for inches, displayed together to give height or enter total inches in height and convert to ft and inches.
Under the Dive Site after selection a dive:
--------------------------------------------
On the Dive Info Tab:
- As noted before - the height in Ft/inches
- The firmware version is not displaying
- Visibility field only allows meters in drop down. - This needs to allow ranges in Feet.
- The email and address (probably all fields on this tab) truncate at 18 character. This cuts off my email and address enter on the Diver information in the database.
- Surface Time in not being populated.
On the Setting Tab:
- The Depth and Temperature Units - do not display correctly as it shows meters and Celsius units but the computer is set to ft. and Fahrenheit.
On the Tank Tab:
- The Operating Tank Pressure does on save after input.
- The Tank Volume has a bunch of zeros behind it... Probably a conversion issue.
--------------
Under the Dive Chart Tab
When you trace the cursor over the lines on the graph
- the correct dive start time is not displayed - Every dive starts at 12:00 AM.
- the bar graph - print units and graph title is too small to read - What is this suppose to tell me - I think saturation?
NabooDiver
I downloaded and installed new DiveOrganizer Version 1.8.9.1337. The following are still bugs noted by me and others. The good news is one of the prior bugs is now fixed and that is the weight - it is now correct on the database and in the Diver TAB. Yes !!
Bugs unfixed and still in version 1.8.9.1337:
Under the Database drop down:
- Height on the Diver input height of 5.6 (5'6") converts to 7 ft on save (still not converting correctly).
- May I suggest that the height should be split into two fields one for feet and one for inches, displayed together to give height or enter total inches in height and convert to ft and inches.
Under the Dive Site after selection a dive:
--------------------------------------------
On the Dive Info Tab:
- As noted before - the height in Ft/inches
- The firmware version is not displaying
- Visibility field only allows meters in drop down. - This needs to allow ranges in Feet.
- The email and address (probably all fields on this tab) truncate at 18 character. This cuts off my email and address enter on the Diver information in the database.
- Surface Time in not being populated.
On the Setting Tab:
- The Depth and Temperature Units - do not display correctly as it shows meters and Celsius units but the computer is set to ft. and Fahrenheit.
On the Tank Tab:
- The Operating Tank Pressure does on save after input.
- The Tank Volume has a bunch of zeros behind it... Probably a conversion issue.
--------------
Under the Dive Chart Tab
When you trace the cursor over the lines on the graph
- the correct dive start time is not displayed - Every dive starts at 12:00 AM.
- the bar graph - print units and graph title is too small to read - What is this suppose to tell me - I think saturation?
NabooDiver