Halcyon STA + OxyCheq wing?

[Vie]

This is probably a dumb question...

Is it possible to fit a Halcyon STA to a Oxycheq “Signature Series” #30 wing? Just wondering if the holes in the OxyCheq wing will align with the fixed screws on the Halcyon STA.

 

[cool_hardware52]

This is probably a dumb question...

Is it possible to fit a Halcyon STA to a Oxycheq “Signature Series” #30 wing? Just wondering if the holes in the OxyCheq wing will align with the fixed screws on the Halcyon STA.

Vie,

The one "standard" for Backplates is the spacing of the holes in the center channel. Virtually all plates will have at least one pair of holes at 11" centers.

These holes are used for either the bolts on doubles, or for securing a STA. It then follows that virtually all STA's have bolts at 11" centers. Almost all wings will have grommet holes in the center panel that match the location of the holes in the backplates, and match the spacing of the bolts used on a STA.

In short the combination you are asking about should be no problem.


Tobin

 

[The Natural]

Should be able to fit, I use a Dive Rite BP with an Oxycheq wing on occasion.

 

[Vie]

Thank you for the quick replies, guys.