Hollis DG03 mac driver

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

justcallmecam

Registered
Messages
42
Reaction score
4
Location
Siquijor island, Philippines
# of dives
I just don't log dives
It should work with MacDive. Make sure correct port is selected, I ran into this problem yesterday trying to download my Suunto, go into advanced setting and check what serial port it's trying to use. And of course make sure you have selected transfer on your DG. Good Luck.

---------- Post added November 21st, 2013 at 02:12 AM ----------

I assume you downloaded the driver.

---------- Post added November 21st, 2013 at 02:14 AM ----------

Is it giving you an error message, Code-4 or Code-6?
 
You might want to check out DiverLog, claims to work with Hollis and I've had zero problems using it with my Oceanic VT-4.0.

Diverlog
 
https://www.shearwater.com/products/swift/

Back
Top Bottom