• Welcome to ScubaBoard

  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

How to connect two Ikelite strobes to a sea&sea housing ?

Discussion in 'Sea&Sea Society' started by Nuno A, Sep 15, 2013.

  1. Nuno A

    Nuno A Nassau Grouper

    # of Dives: 200 - 499
    Location: Portugal
    I've a Nikon d200 with a sea&sea housing.

    I want to connect my two Ikelite strobes, a ds51 and a ds160, the housing as two bulkheads, can I contect booth with two separate sync cables to each bulkhead or I need to get a double sync cable ?

    thank you !!!
  2. Ikelite Staff

    Ikelite Staff Dive Equipment Manufacturer

    Nuno A,

    If youÂ’re going to shoot TTL, you will need a TTL adapter and a dual cord. For manual flash, either two single cords or one dual cord will work.

    This assumes that the hotshoe is connected to both bulkheads, not an either/or style connection.

    Best Regards,

    Brett Foster - Ikelite
  3. Nuno A

    Nuno A Nassau Grouper

    # of Dives: 200 - 499
    Location: Portugal
    Can use the both 4104.6 and 4104.31 ?
  4. EricPhotography92

    EricPhotography92 Angel Fish

    # of Dives: 50 - 99
    Location: Southern California
    honestly i would sell the ikelite strobes, keep the housing and use the money to get one sea sea strobe "ysd1" and latter on get another D1- D1 is the best strobe by far small and super powerfull- worth every penny - you can find them on ebay if you look hard enough for 620$ new, its soo much simpler to have same company's housing and strobe
    Nuno A likes this.

Share This Page