In need of a G2. Guru!!

[louwelder]

Just bought a G2 . Took it home paired it with transmitter. Then Set low air alarm at 2600. . Tank has 2900. And Nothing happened ! Searched all over internet found nothing.!! I was basically trying to get an alarm to activate .

 

[dfcliff]

Ummm, let more air out until it gets below 2600?

 

[louwelder]

Ummm, let more air out until it gets below 2600?

switch the numbers Alarm is at 2900. Tank at 2600

 

[Hatul]

It's very weird to set the low pressure at 2900 psi. It may be that it's too high for the alarm to kick in. Try something more reasonable.

 

[louwelder]

Next Question !
Transmitter on tank and 2900 psi
G2 Displays 2900
If i shut off valve to tank and purge 2 nd stage b

It's very weird to set the low pressure at 2900 psi. It may be that it's too high for the alarm to kick in. Try something more reasonable.

ok i will try that its my first computer ..

 

[Hatul]

Try setting the pressure alarm at something lower than the tank pressure, like 1500 psi. Personally I don't use the tank pressure alarm. I get an alert when the RBT is less than 3 mins.