buff
Contributor
Recently went diving and to my amazement my Jetsteam second stage would not seat upon opening the air.
I was shocked.
A friend of mine just used this same reg. in Cozumel with no problems. I didn't touch it since then and I know he didn't adjust anything.
I opened up the second stage and with a needle nose pliers dialed down the pilot valve so it didn't always push against the diaphram.
It worked perfectly. I had to do it to both primary and secondary.
Here are my questions:
1. Did I do this correctly?
2. Why did the second stages loose their tuning?
Thanks
Mike
I was shocked.
A friend of mine just used this same reg. in Cozumel with no problems. I didn't touch it since then and I know he didn't adjust anything.
I opened up the second stage and with a needle nose pliers dialed down the pilot valve so it didn't always push against the diaphram.
It worked perfectly. I had to do it to both primary and secondary.
Here are my questions:
1. Did I do this correctly?
2. Why did the second stages loose their tuning?
Thanks
Mike