For Sale Kidde 6.0 Compressor $1500

[Dawgdirt]

Bei Facebook anmelden

Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.

www.facebook.com

 

[Dwmathews88]

Can you provide information to where we don’t have to click the link. I’m interested in the CFM and high side pressure.

 

[rob.mwpropane]

Can you provide information to where we don’t have to click the link. I’m interested in the CFM and high side pressure.

I'll help! This is everything in the post.

Walter Kidde 6 SCFM High Pressure compressor. Dayton motor is a 3 hp 1750 rpm 119V/230V P1 1740 RPM direct drive to the pump. Set to run ½ speed, 1740 RPM, this 4 Stage pump is producing 3.0 SCFM. 230V @ 19 amps. It is reported that these can run at 4500 psi and are clean enough for gas blending, aka Nitrox. Running (One Half Speed) should make the pump last forever. eBay item number:165225754075

 

[Dawgdirt]

Thanks Rob,
The inherent design of these units has been proven for over 50 years. Originally designed to free .50 Cal jammed shells in aircraft mounted guns. This model is current on the M60 Tank to expel unused propellant from the barrel of the main tank gun before next shot can be Loaded. (A pair of these is used to generate the blow) Notice the puff after the shot is fired in this video at the 34 second mark.. https://youtu.be/3Rbqb7WVgpk

YOUTUBE.COM
RTA M60 Firing Main Gun
RTA M60 Firing Main Gun

 

[RW916]

Bei Facebook anmelden

Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.

www.facebook.com

View attachment 713617

Is the compressor still available?