Lookiing for Aqua Lung Titan Yoke parts

[theITdiver]

I just got an AL Titan LX for a decent deal, however it is setup for DIN, and I need Yoke. Does anyone out there have the parts left from a Yoke to DIN conversion? Let me know what you've got to offer! Thanks!

 

[Scubarus66]

Yes I have this part. Please email me at Scubarus@gmail.com . We may be able to work something out... I'll send you a picture if you would like

 

[claymore]

There are two models of the Titan. The current model and the one that was produced for years until about 2009. They use different Yoke and Din parts so you have to know which reg you have.

A din adapter would probably be the cheapest route and the most versatile.

 

[Ryan Y]

I think I have a yoke. Ill check. I need the DIN set-up/ I can just trade you.

Ill post some pics in about an hour.

I guess I should say I dont need The DIN but I have a yoke. I can sell if I need to or trade.

 

[Ryan Y]

Here you go.

 

[theITdiver]

thanks for all of the replies. I found a yoke from a friend and got an unbeatable deal. I an 90% sure the reg I have is not environmentally sealed so I am however interested in info about converting it to be environmentally sealed. It looks like the pictures above have the environmental kit sealing the first-stage if I understand it correctly. Is there any conversion to be done to the first stage? How much should I expect to pay at my LDS for the conversion?

Thanks!

 

[claymore]

I believe the environmental kit is about $60.00. The reg has to be somewhat disassembled to install it and and adjust the IP pressure. What the service charge will be depends on your LDS and how well you get along with the service tech. If you have the reg serviced there should be no extra charge charge to install it because it will be torn apart anyway.

 

[moneysavr]

thanks for all of the replies. I found a yoke from a friend and got an unbeatable deal. I an 90% sure the reg I have is not environmentally sealed so I am however interested in info about converting it to be environmentally sealed. It looks like the pictures above have the environmental kit sealing the first-stage if I understand it correctly. Is there any conversion to be done to the first stage? How much should I expect to pay at my LDS for the conversion?

Thanks!

looks like it has the seal kit on the end,