84CJ7
Contributor
I put this together as a regulator for my pony bottle, but with a major gear brand change its up for sale.
The second stage is original to the first stage but I am not 100% sure on the model, its either a "navy" or a "IV" I think. It seemed to use a lot of parts the Abyss second stage does. I rebuilt the first stage using a kit and also put a new tri material seat it in, the second stage I didn't have a kit for so I just put a few new O rings in and flipped the LP seat and it seems to breathe well though it would be prudent to have the whole setup checked out before use.
The DIN connector I bought used and added when I rebuilt the MR12 and its a 200 bar version because I wanted the thing as tiny as possible overall and the 200 bar fits completely inside the connector on the convertible din/yoke tank valves wheras the 300 bar ones stick out farther.
I will also include the original yoke parts, and an extra MR12 stripped main body that I bought because its a slightly newer one with an extra port on it, but then ended up not using.