Miflex

[Just another Cinderella]

Just bought Miflex hoses including an inflate hose for my BCD, a SeaGuest pro with an Air Source second stage/octo.
The Miflex coupling collar is to small for the inflate attachment "peg" on the inflater.
What am I missing and how do I use Miflex with this set up?
Thanks,
SMB

 

[masterof0]

The miflex with std inflator attachment will not work with any type of air source inflator. The standard inflator does not have a high enough air flow rate to support the regulator . What you need to do is get a lp regulator hose and move the connector that came with your air source hose over to the regulator hose. (it is just an adapter that can be removed from the rubber hose and placed on the miflex hose)

Here is a thread that I started a while ago that addresses the same question
http://www.scubaboard.com/forums/new-divers-those-considering-diving/267896-miflex-air2.html

 

[Just another Cinderella]

Thanks
Found the discussion helpful and also found the adapter.

SB

 

[snowmaker]

I have been using a Miflex with my AIRII for about a year now.

You need to buy a regulator hose in the length you want and move the LP connector from your old hose to the new Miflex one.