Not for sale but curiosity, found on local buyand sell with a conshelf 14 set is this auto tightening 1st.
Just got it home and tried it.
While fairly stiff to pull apart, it's far from difficult.
That's just to hold it while compressed gas is added.
At first there was the tiniest of hp leak and then, with a slight wiggle, it acted as though( and probably is) air activated hydraulics. At least that's how it felt as it just grabbed the valve and stopped the leak instantly.
I will also say it grabbed harder than I would tighten a yoke by hand.
1 hp and 2 lp on the swivel turret.
This is how I got it....
Just got it home and tried it.
While fairly stiff to pull apart, it's far from difficult.
That's just to hold it while compressed gas is added.
At first there was the tiniest of hp leak and then, with a slight wiggle, it acted as though( and probably is) air activated hydraulics. At least that's how it felt as it just grabbed the valve and stopped the leak instantly.
I will also say it grabbed harder than I would tighten a yoke by hand.
1 hp and 2 lp on the swivel turret.
This is how I got it....