• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

MR12 Yoke to Din Adapters

Discussion in 'Mares... Just add Water!' started by Scared Silly, Jun 4, 2006.

  1. Scared Silly

    Scared Silly Regular of the Pub

    # of Dives: 500 - 999
    Location: on the path to perdition
    5,540
    1,100
    113
    I have three MR12 regs that currently use a yoke attachment. I would like to be able to use them with DIN valves. There appears to be two different Yoke-To-DIN adapters made by Mares, is this correct? At the same time I am thinking about making them permanently DIN, is this possible? What should the MSRP be for this versus just getting the adapters.

    Thanks
     
  2. do it easy

    do it easy Assistant Instructor

    # of Dives: 500 - 999
    Location: Chicagoland, USA
    5,023
    6
    0
    ooops, just realized that this is the manufacturer's forum. I'll let them answer the questions.
     
  3. Phil Mintz

    Phil Mintz Dive Equipment Manufacturer

    639
    0
    0
    The new adapter is not for the MR12. The model you want is 416804.

    Retail should be around $50, Retail for a new MR12 depending on 2nd stage is from $200 to $400.
     
  4. Scared Silly

    Scared Silly Regular of the Pub

    # of Dives: 500 - 999
    Location: on the path to perdition
    5,540
    1,100
    113
    Thanks Phil. I assume by your posting that these can not be switched to be "permanently" DIN without getting a new 1st stage. E.g. the threaded port value that the yoke nut is on can not be removed.

    Thanks
     
  5. cerich

    cerich ScubaBoard Supporter ScubaBoard Supporter

    # of Dives: 5,000 - ∞
    Location: Georgia
    6,589
    3,359
    113
    you can make them permantly DIN. I'll look in the garage and see if I can't find the part number.
     
  6. Phil Mintz

    Phil Mintz Dive Equipment Manufacturer

    639
    0
    0
    Chris is correct, it can be converted, but I did not pursue this. We can also look up the part number, but it is not a part we will have in stock in the US since we do not sell the DIN version.
     

Share This Page