My ranger needs new bladder or repair to the inflater hose connector

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Rogersea

Contributor
Scuba Instructor
Messages
1,091
Reaction score
136
Location
Tongo Poiint Basdiot Moalboal Philippines
# of dives
Hi I will be back in the states for a couple of months and am wondering if I can purchase the parts to repair my bladder? the threaded plastic connector has come off the bladder and I would like to repair the BCD vice replace any suggestions...

Cheers,
Roger
 
Hi Roger, contact Susan in our Service Department at service@zeagle.com and send her a picture of your BC, the bladder assembly, and the affected area and she'll be able to instruct you on the best possible solution. If I understand you right and the threaded flange has seperated from the inner urethane bladder then we are most likely looking at replacing the inner bladder. Its a simple operation and you could purchase the inner bladder from your local dealer to install yourself.

Hope that helps!
 
https://www.shearwater.com/products/teric/

Back
Top Bottom