cool_hardware52
Contributor
I just dove my wing today in the quarry. Congratulate me...46 degrees and in a 7mm suit, hood, and gloves!Anyway, I ran into the same problem with the length of the corrugated hose. So, can you be a little more specific...Do I use the innertube on the harness and pass the LP hose thru that, and then just use a loop of bungie tied to the left shoulder D right for the corrugated hose and inflator? I didn't do anything with the corrugated hose and it was always floating above me. I felt like I had to hold onto it the whole time.
Thanks!
Run the LP hose only under the inner tube above the left Dring.
Tuck the inflator through the bungee loop at the left shoulder dring. This loop should not be tight.
This keeps the inflator on your chest.
Tobin
