Is it possible to convert a yoke MK25 to DIN? Is it something I can do myself or need to take in to my LDS?
Thanks,
Ken
Thanks,
Ken
Scuba Pro MK 25 Yoke to DIN?
- Thread starter Mr. Sunday
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
You can order the Yoke kit from any SP supplier.
Takes about 10 minutes to swap them over you will need a soft grip vice, a big adjustable wrench and a couple of Alan keys
Takes about 10 minutes to swap them over you will need a soft grip vice, a big adjustable wrench and a couple of Alan keys
R
redacted
Guest
There should be 22 to 23 ft-lb of torque on that main connection. I've always used a vise and a torque wrench. For a one time changeover, you might want to let your LDS handle this. Shouldn't be more than about $20.00. If you don't mess up the yoke nut with an adjustable wrench, you should get at least that much for it on e-bay.
Similar threads
