tmassey
Contributor
I have a number of SCUBA tanks for sale in Michigan. I have three AL80 tanks, one HP100 and two LP121's. (Also some sets of doubles -- see the bottom for link.)
Aluminum 80's
These are Luxfer Aluminum 80's. Both are the "good" aluminum, and will have no problems getting filled! Two of them were born in 2007, and hydroed 2019/10. One was born 1993 and hydroed in 2021/08. Both tanks have 2022/07 viz. The 2019 tanks are filled with EAN32, and if dropped off will keep the fill. The 2021 tank is empty. These tanks include Pro/Convertible Yoke/200-Bar DIN valves. They are configured for DIN, but yoke inserts are available. Stage rigging is not included. $100 each.
Steel High-Pressure 100
This is a PST HP100 Hot-Dipped Gavlanized Steel. This is a SP-9791 tank which was just renewed, so there will be no issues with fills or hydros. The tank was born in 2005 and last hydroed in 2014 - the only one listed *NOT* in hydro. Tank is filled with air, and if dropped off will keep the fill. This is a true 3500 PSI tank with proper Genesis 300-bar DIN valve. $200
Steel Low-Pressure 121
These are PST LP121 Hot-Dipped Galvanized Steel. These are DOT 3AA-2400, so no issues with fills or hydros. The tanks were born in 1971 and last hydroed in 2019/05. both tanks have 2022/07 viz. These tanks are empty, but an air or EAN32 fill can be included if you wish. These tanks include Yoke valves. $260 each.
Photos
Photos are attached below. Click on the thumbnails to see the full version.
Shipping or Regional Dropoff
Shipping is always the problem. I'm seeing prices as high as $100 for 40 pounds 30x10x10 between Michigan and Los Angeles. Of course, exact amount can vary. Shipping will be at cost, plus $15 for packaging. They will be well packed with at least 1/2" of rigid styrofoam insulation around the tanks. Tanks will be shipped completely emptied, with valve removed (to meet hazmat requirements). If you buy several, they can be shipped either individually or together, and I will facilitate LTL that you arrange if you prefer.
However, I am going from Michigan to North Florida next week (February 22/23, 2023). I would be happy to deliver them anywhere within 20 miles of I-75 for a fixed $25. If you're farther than that, we might be able to negotiate something, or we can simply meet at a gas station or parking lot and you can drive them the rest of the way.
Please let me know if you have any questions. Thank you very much!
I also have doubles you might want to see, with the same delivery terms!
Aluminum 80's
These are Luxfer Aluminum 80's. Both are the "good" aluminum, and will have no problems getting filled! Two of them were born in 2007, and hydroed 2019/10. One was born 1993 and hydroed in 2021/08. Both tanks have 2022/07 viz. The 2019 tanks are filled with EAN32, and if dropped off will keep the fill. The 2021 tank is empty. These tanks include Pro/Convertible Yoke/200-Bar DIN valves. They are configured for DIN, but yoke inserts are available. Stage rigging is not included. $100 each.
Steel High-Pressure 100
This is a PST HP100 Hot-Dipped Gavlanized Steel. This is a SP-9791 tank which was just renewed, so there will be no issues with fills or hydros. The tank was born in 2005 and last hydroed in 2014 - the only one listed *NOT* in hydro. Tank is filled with air, and if dropped off will keep the fill. This is a true 3500 PSI tank with proper Genesis 300-bar DIN valve. $200
Steel Low-Pressure 121
These are PST LP121 Hot-Dipped Galvanized Steel. These are DOT 3AA-2400, so no issues with fills or hydros. The tanks were born in 1971 and last hydroed in 2019/05. both tanks have 2022/07 viz. These tanks are empty, but an air or EAN32 fill can be included if you wish. These tanks include Yoke valves. $260 each.
Photos
Photos are attached below. Click on the thumbnails to see the full version.
Shipping or Regional Dropoff
Shipping is always the problem. I'm seeing prices as high as $100 for 40 pounds 30x10x10 between Michigan and Los Angeles. Of course, exact amount can vary. Shipping will be at cost, plus $15 for packaging. They will be well packed with at least 1/2" of rigid styrofoam insulation around the tanks. Tanks will be shipped completely emptied, with valve removed (to meet hazmat requirements). If you buy several, they can be shipped either individually or together, and I will facilitate LTL that you arrange if you prefer.
However, I am going from Michigan to North Florida next week (February 22/23, 2023). I would be happy to deliver them anywhere within 20 miles of I-75 for a fixed $25. If you're farther than that, we might be able to negotiate something, or we can simply meet at a gas station or parking lot and you can drive them the rest of the way.
Please let me know if you have any questions. Thank you very much!
I also have doubles you might want to see, with the same delivery terms!
For Sale - SCUBA Double Tanks for sale: E7-HP100 / LP72 in hydro!
I have a number of SCUBA tanks for sale in Michigan. I have a set of HP100 doubles and a set of LP72 doubles. (Also some single tanks -- see the bottom for link.) Steel High-Pressure 100 Doubles These are PST HP100 Hot-Dipped Galvanized Steel. These are SP-9791 tanks which was just renewed...
scubaboard.com