Scubapro adapter needed

[Fleetkeeper]

I have a Scubapro BCD with air 2. XS Scuba makes a bc wash out hose (part # TL 112) that fits the inflators of standard QD nipple so you can really flush it out without getting so wet. Not what Scubapro uses.
So it does not work.

Does anyone know if you can get or jerry rig an adapter that will make this work?
Marin Dive has ordered me 2 different ones and neither work.
The last part says s124 Scubapro male to std female.
The female end is too small (inner dimension is 8mm across, the Scubapro one needs to be 11mm across).
Any ideas?

 

[tursiops]

The last part says s124 Scubapro male to std female.

This is backwards....you want a std male (to fit your wash hose) and a Scubapro female (to fit your BCD).
Aqua Scubapro Standard Inflator to Air II Hose Adapter

 

[Fleetkeeper]

This is backwards....you want a std male (to fit your wash hose) and a Scubapro female (to fit your BCD).
Aqua Scubapro Standard Inflator to Air II Hose Adapter[/QUOTE

Just got answer from XS Scuba. They say you are not supposed to run water thru a breathing Air 2, the nipple, therefore do not use on this unit. Bummer, it’s a cool gadget, I get so wet doing it the regular way.