globaldiver
Contributor
I recieved the specs on PST E8-130 yesterday from Thomas Ivey at PST.
They are as follows:
Service pressure: 3442 PSI,
Water Cap (ci) 1013,
Water cap (lt) 16.6,
Capacity @3442psi 130.0
Capacity @ 3000 psi 119.1
Capacity @2640 psi 106.1
Diameter Inches: 8.0
Lenght inches: 25.56 (cylinder only)
Weight lbs: 42.2 (weight of cylinder only)
Boyancy empty: -4.8 (cylinder, valve, tank boot in salt water)
Boyancy full: -14.6 (cylinder, valve, tank boot in salt water)
Neck tread 3/4-14 NPSM
Material: Chromium Molybdenium
Hot dipped galvanized
I hope this can be of interest since there has been different numbers floating around on the internet.
Sincerely
Anders
They are as follows:
Service pressure: 3442 PSI,
Water Cap (ci) 1013,
Water cap (lt) 16.6,
Capacity @3442psi 130.0
Capacity @ 3000 psi 119.1
Capacity @2640 psi 106.1
Diameter Inches: 8.0
Lenght inches: 25.56 (cylinder only)
Weight lbs: 42.2 (weight of cylinder only)
Boyancy empty: -4.8 (cylinder, valve, tank boot in salt water)
Boyancy full: -14.6 (cylinder, valve, tank boot in salt water)
Neck tread 3/4-14 NPSM
Material: Chromium Molybdenium
Hot dipped galvanized
I hope this can be of interest since there has been different numbers floating around on the internet.
Sincerely
Anders