Testing a p-valve install?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Armymutt25A

Contributor
Scuba Instructor
Divemaster
Messages
127
Reaction score
0
Location
Raleigh, NC
# of dives
200 - 499
I have been installing a p-valve in my Black Ice this week. It started on Saturday with determining placement and then sticking on a piece of aluminum tape with an appropriate size hole as a guide. I burned out the hole with a soldering iron, using a larger size socket on the backside to keep from damaging the rest of the suit. After the hole was made, I used a 1/2" bolt with 2x 2" washers and tightened the whole thing down for a day or so. Last night, I roughed up the gaskets with sandpaper and glued them on each side of the hole using RTV silicon sealant, and then put the washer/bolt system back on. Tonight I will put on the rest of the p-valve assembly. I've going diving this weekend and would like to know how I can test the valve for leaks. Short of filling the bath tub and sitting in it, anyone have some ideas?
 
Does the shop you bought it from have a pool?

I assume you're testing for bubbles and not "function," they may not like that test in the pool. :p
 
No pool at the shop. Looking to test for incoming leaks, not worried about the opposite.
 
I'm kind of at the same point with my pee valve install. I would suggest just go ahead and dive the suit. Any exterior leak from the pee valve area is likely to be very small due to the way it's installed. I'm more concerned about leaks from the interior plumbing, cath forward. But maybe you've already checked that out.
 
Dive the suit - or - clamp the neck and wrist openings, inflate the suit and spray a soapy solution on/around the P-valve. If it bubbles it will leak. If not you're probably good to go.

Henrik
 
What Henrik said. The bathtub approach also works.
 
I have a question that hopefully one of can answer. I just got a new drysuit with the Halcyon Streamline P-Valve installed. I haven't dove with it yet. The hose coming from the p-valve is really long, maybe 2 feet or so. It seems like the longer the hose, the more pee will stay trapped in the hose and not drain out through the valve, which could get messy when doffing the suit. Is that the case? Should the hose be cut to the shortest length needed based on my routing, or does the extra length not really matter? Your help is appreciated!
 
I have a question that hopefully one of can answer. I just got a new drysuit with the Halcyon Streamline P-Valve installed. I haven't dove with it yet. The hose coming from the p-valve is really long, maybe 2 feet or so. It seems like the longer the hose, the more pee will stay trapped in the hose and not drain out through the valve, which could get messy when doffing the suit. Is that the case? Should the hose be cut to the shortest length needed based on my routing, or does the extra length not really matter? Your help is appreciated!

Sorry, but this just reminded me of an old Richard Pryor bit...

(first guy) "Boy, that water's cold!"
(second guy) "Yea, and deep to!"
 
If I could add to my question - does body position affect the function of the p-valve? Having never used one, I'm not sure how gravity might affect the flow through the tube and out the valve.
 

Back
Top Bottom