Trimming hogarthian harness webbing

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Hank49:
I've had better luck making a straight, perpendicular cut rather than rounded. If I try to round the end, so it'll slide into the buckle easier, it frays much quicker, even when you melt it or whatever, because of more exposed multi strands I guess on the side. And, the webbing is narrow enough to fit the buckle anyway so it doesn't need to be rounded.


I agree with Hank49.... Been there done that. Always, to be simple is better option. I am using a razor, soldering iron, super glue for closing the job.
 
Thanks for all of the recommendations. I was able to get the harness adjusted with 3 dives this weekend at the GLWC Meet and Greet, so I'll be trimming it this week.
 
http://cavediveflorida.com/Rum_House.htm

Back
Top Bottom