Two questions:

[recoiljunky]

Regarding your Hog harness:

1. How do you secure the inflator hose to the harness?
2. What are the inner tube pieces on the harness for.

Thanks.

 

[bryanmc57]

1) Check the many discussions of this in the hogarthian sub-forum in the tech diving section. Short answer: most folks use a loop of 1/8th or 3/16 bungee cord looped through the tri-glide for the left chest d-ring.

2) The piece of innertube above the left chest d-ring is used to secure the lp inflator hose to the webbing. The pieces below the d-rings are for securing the bckup lights after they're clipped off.

 

[cool_hardware52]

Regarding your Hog harness:

1. How do you secure the inflator hose to the harness?
2. What are the inner tube pieces on the harness for.

Thanks.

We include three pieces of inner tube. Two are intended to be used on the lower portion of the shoulder straps to secure bezel end of backup lights.

The third is place above the left dring. The LP hose, (not the corrugated hose) is passed under it. It's about at the top of your shoulder.

Many also rig a piece of 1/8 or 5/ 32 bungee at the left dring. Fairly large loop to accommodate the inflator and lp hose.

Tobin