spoolin01
Contributor
I found this inside an old SP 109. I haven't seen this style of poppet in the documents or discussions here at SB, except possibly the 1978 Technical Manual. The cut-away diagram on page 10 appears to look like this one. The odd thing about this setup is that the spring end just seems to rest crudely on the thin cylinder end of the poppet.
Have I guessed correctly at this, are there parts missing, or is this some kine of DIY kluge that someone else installed?
Have I guessed correctly at this, are there parts missing, or is this some kine of DIY kluge that someone else installed?