whip for mixing

[teckhead]

Hi all, just woundering if anyone (teckdiver) had a go at making there own whip for GAS BLENDING,
could someone show me photos and spec please ?

warmest regards Tony

 

[kidspot]

http://www.airspeedpress.com Check out Vance Harlow's Oxygen Hackers companion - lots of specs, photos, etc.. - Plus a fun to read style .... I couldn't put it down

Tim

 

[Dive4Life]

http://www.airspeedpress.com Check out Vance Harlow's Oxygen Hackers companion - lots of specs, photos, etc.. - Plus a fun to read style .... I couldn't put it down

Tim

I have the book and he only mentions parts from Western when making a whip. I don't have access to Western parts as easily as I do McMaster parts. A parts list from the most readily available source would have been greatly appreciated. Guess you gotta have a friend at a welding shop or something. I'll send you the link to the site that has all the parts you need for a whip.
http://www.cisatlantic.com/trimix/other/parts.htm Once again this is a Western parts list. McMaster sells a gas hose but the 48" hose costs about $120 dollars. Oxyhacker if you are listening do you think you could provide the people who bought your book with a better parts source/list? It would be greatly appreciated.

 

[Stone]

Hi all, just woundering if anyone (teckdiver) had a go at making there own whip for GAS BLENDING,
could someone show me photos and spec please ?

warmest regards Tony

I built this whip for transfilling O2 into emergency and deco bottles. A Partial Pressure fill whip would need a good "Master" gauge in the proper range. The picture has some McMaster part numbers and prices.

 

[dmdalton]

Here ya go.

http://atlanticunderwater.com/equipment/fillwhip.shtml

Dave D

 

[Hoosier]

This is my current DIY project after having done the spring strap one.

Here ya go.

http://atlanticunderwater.com/equipment/fillwhip.shtml

Dave D

 

[dmdalton]

This is my current DIY project after having done the spring strap one.

Have fun. PM any questions. Happy to help.

Dave D

 

[ericrd]

Tim is being modest - he put a great post some time ago, with all the parts # form McMaster
http://www.scubaboard.com/showthread.php?t=107170

eric

 

[Tiny Bubbles]

I built one with parts from McMaster-Carr and Northeast Scuba. Here's a link to my parts list: http://69.47.246.17/diving/diy/fillwhip/whip.html

-Tiny-B.

 

[kidspot]

Nice job on your fill-whip and site T.B.

Aloha, Tim