RonBrugger
Registered
I am looking for a used compressor to put in a new dive shop I am opening in Nicaragua. I hope to spend about $5,000 and can go as high as $8,000. 3-phase electricity is not available, so I am looking for a smaller compressor.
WTB: Compressor - 1-phase 220v
- Thread starter RonBrugger
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
I have access to a couple 6 scfm machines. One is a Bauer Capitano and the other is a Poseidon. Both are bare bones right now, but I can add automatics to them. Is the power supply 60 or 50 HZ, as the voltage you listed is possible with both. If you are interested, shoot me a PM.
Craig
Craig
rcontrera
Contributor
Does it have to be used? A new 7.6 is less than $7000!
frogman62
Contributor
I have a very good new Noah Howden 6 cfm that will pump 5000PSI on a small frame 5 HP single phase with large Filter very suitable for a dive shop( $3600) all automatic $4100
Look at my web site sheldensportinggoods.com
You can call me at 316-992-0505
Jim Shelden
Look at my web site sheldensportinggoods.com
You can call me at 316-992-0505
Jim Shelden
