mustang_5l
Contributor
- Messages
- 581
- Reaction score
- 19
- # of dives
- I'm a Fish!
Here is the e-mail they just sent me...
Hello Liquivision Xen owners!
We hope you are enjoying diving with your new Xens! Based on feedback from the first customer dives we would like to clarify the following about your unit:
- The Xen defaults to salt water (2.5% salinity). Many other gauges default to fresh water (0% salinity). In that case, you will see a discrepancy in the depth readings between your Xen and your existing gauge. If you want to see similar readings then you should adjust the salinity settings on all gauges to the same salinity, preferably to the salinity in which you are diving.
- The Xen dive log will show a very low temperature as the minimum. This will be fixed in a software update that will be available in a few days.
- The stopwatch can be controlled with tap shortcuts that are not obvious unless you read the manual.
Hello Liquivision Xen owners!
We hope you are enjoying diving with your new Xens! Based on feedback from the first customer dives we would like to clarify the following about your unit:
- The Xen defaults to salt water (2.5% salinity). Many other gauges default to fresh water (0% salinity). In that case, you will see a discrepancy in the depth readings between your Xen and your existing gauge. If you want to see similar readings then you should adjust the salinity settings on all gauges to the same salinity, preferably to the salinity in which you are diving.
- The Xen dive log will show a very low temperature as the minimum. This will be fixed in a software update that will be available in a few days.
- The stopwatch can be controlled with tap shortcuts that are not obvious unless you read the manual.