I know there are purpose made wings for the BP, but is there a way to attach a bladder off a regular BC to the BP? I took the 65lb one off my old Tech and would like to use it on a BP.
Zeagle BP - bladders?
- Thread starter Armymutt25A
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
OP
Disregard. A Google search revealed what a board search didn't.
ScottZeagle
Contributor
- Messages
- 2,353
- Reaction score
- 72
In case this question comes up again:
Zeagle backplates have pre-drilled holes that match up with the bladder on a Ranger/Tech/etc.
All you have to do is remove the bladder from your BC, line up the holes with the backplate, and install the stainless steel screws and nyloc nuts that are included with the backplate.
Thanks,
Scott
Zeagle backplates have pre-drilled holes that match up with the bladder on a Ranger/Tech/etc.
All you have to do is remove the bladder from your BC, line up the holes with the backplate, and install the stainless steel screws and nyloc nuts that are included with the backplate.
Thanks,
Scott
OP
What's the size for those screws in case they don't happen to be with the backplate?
ScottZeagle
Contributor
- Messages
- 2,353
- Reaction score
- 72
As best I can tell by the description, The stainless steel screws are 10-32 x 7/16". The nyloc nuts are 10-32, 18-8.
Hope that helps!
Hope that helps!
Similar threads
