Guille G
Contributor
What high end 7mm wetsuit should I get?
Clearly a trick question. OBVIOUSLY if you need more than 5mm you should be diving dry. Duh.
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
What high end 7mm wetsuit should I get?
Just use the bail out reg. So long as it isn't the 100%, that might catch on fire unless you have oxygen cleaned the SMB first.Writing a thesis on the best way to inflate a DSMB especially when on a rebreather.
Answer: use a self-inflating one with CO2 cartridges or a crack bottle, or use the suit inflate.
And waste the precious bailout gasses on putting up a blob?Just use the bail out reg. So long as it isn't the 100%, that might catch on fire unless you have oxygen cleaned the SMB first.
And waste the precious bailout gasses on putting up a blob?
The drysuit tank will need filling, so just use that inexpensive air for the inflation.
Better still a crack bottle or CO2 cartridge.
Just use the bail out reg. So long as it isn't the 100%, that might catch on fire unless you have oxygen cleaned the SMB first.
And that brings up oxygen clean and Nitrox. Ever seen someone get upset if a valve on a Nitrox bottle is touched with a bare hand? It's no longer oxygen clean!
And waste the precious bailout gasses on putting up a blob?
The drysuit tank will need filling, so just use that inexpensive air for the inflation.
Better still a crack bottle or CO2 cartridge.
And now we have the example of the SB “poop storm within a poop storm”!!!We don’t have the crack bottles here in North America.
I doWe don’t have the crack bottles here in North America.
I do