8 1/2 Tank Boot

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

mhedman

Registered
Messages
27
Reaction score
2
Location
Key West
I just picked up an LP120 that needs a boot but it's 8 1/2 in. in diameter. Anyone have an idea where I can find one?
 
Hello Mhedman,

You might want to double check that measurement. Here is a link to a chart for most cylinders-I do not see an o.d. of 8.5" for the lp120 listed.
http://www.tdl.divebiz.net/pub/tanks.html

c
 
Here is a link to the leisurepro page that sells the boot:

XS Scuba 8. Tank Boot for Steel Tanks

I have this boot on my Worthington LP 121, 108 & 95. It works great and is specifically sold by XScuba for the XScuba Worthington line. It may or may not work on other 8" tanks, I don't know.

I take the boots off my tanks once a year to check them, I've encounted no rust or complications secondary to using a boot, 90% of my dives are saltwater. I do rinse my tanks with the hose after each day in the water. Good luck!
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom