good find? i think so :)

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

scubaops

Contributor
Messages
129
Reaction score
6
Location
central FL
# of dives
25 - 49
after lunch the girlfriend and i went to a used sporting goods store. i looked where they normally have the scuba/snorkel stuff and they had the same 2 pairs of old fins. i went up to the counter to ask if they had anything new when my girlfriend yelled hey is this any good. she was holding up a us diver sea4 rig with pivot and matrix master dive comp. i went over thinking its going to be way to much for what it is. boy was i wrong $150 for it all. got it home hooked it to a tank and the first stage was free flowing so i took it apart and soaked everything in vinegar over night rinsed all the parts twice. looked every part over lubed all the o rings and put it back together and now it works great. the comp was dead but its back to life with new batteries. :eyebrow:

i pulled off the sea4 2nd stage and put my micra adj on it
this isnt the one i got mine came with the pivot and a lp inflator hose and the octo is different on mine
36c3298a.jpg
 
Was there much corrosion? Overnight in an acid bath is a LONG time, unless it is super dilute... Just curious, because the only time I'll use an acid bath (50/50 vinegar & water) is for corrosion that does not cleanup / brush off with a toothbrush and mild soap... and a "long" soak for me is about 15 minutes, but usually 5-10 does the job.

The reason for NOT getting too frisky with the acid bath is that you'll take some chrome along with the corrosion.

But congrats on the new reg! Looks great!

Best wishes.
 
no corrosion on the hard parts but there was some on the springs but just surface stuff. i didnt know vinegar could hurt chrome ill give your method a shot. thanks for the info my friend,
 
Hi scubaops,

I was hesitant to say anything because it might be taken the wrong way, but since I've learned the hard way, I thought I'd better mentioned it :(

It is easy to forget that vinegar is indeed acidic... since it often "lives" in the kitchen and we use it in cooking, it must be totally safe right? But it is an acid, and so I only use it when really needed, and make sure avoid soaking any "soft" parts (o-rings, seats, diaphragms, etc.) in it, as it could shorten the lifespan of the "soft" stuff.

Best wishes.
 
I'm not sure acid has any effect on the rubber or plastic parts. After all, muriatic acid does come in plastic bottles, and that stuff is hundreds of times more acidic than vinegar. It might depend on the particular plastic. OTOH, I don't think there's any benefit to using acidic cleaners on soft parts either.
 
I'm not sure acid has any effect on the rubber or plastic parts. After all, muriatic acid does come in plastic bottles, and that stuff is hundreds of times more acidic than vinegar. It might depend on the particular plastic. OTOH, I don't think there's any benefit to using acidic cleaners on soft parts either.

You are probably right. Heck, white vinegar comes in a plastic bottle... I could be repeating one of those "common knowledge" things, that may or may not be based on actual fact... I also never work on my regs of Friday the 13th.... But that's just me :D

Seriously, the warning to not soak the "soft bits" in an acid bath is found in one or more of my repair manuals (Mares, Zeagle???).... and of course The Manual is never wrong :wink:

We need a true "kitchen chemist" to jump in here, since I really don't know... Can white vinegar break down or degrade the plastic and rubber commonly used in regulator components?

Best wishes.
 
Vinegar is not called acidic acid for nothing. Also it is typically already very dilute, less than 10%. That said for many cleaning uses it should be diluted to avoid damaging surfaces. Congrats on da find.
 
Simple Green is on the acid side of the chart! Used by many to O2 clean things and stuff. IJS
See you topside! John
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom