Housing Cleaning - Stuck Buttons

[cfelliot]

.....Since there is no electronics in the housing, how about this idea.....

But there is! The TTL flash circuitry is right beside the buttons on the back. Plus, I don't think it would be too good for the foam behind the port.

After 24 hours in the 'Jacuzzi', a lot of button pressing and a day drying, all the buttons seem to finally pressing smooth.

Now a little silicon grease here and there I should be good to go!

 

[RJP]

That would dissolve salt on both sides of the seals.

Unless you had a catastrophic flood, there should not be any salt on the INSIDE of the seals.

 

[ScubaSteve]

But there is! The TTL flash circuitry is right beside the buttons on the back. Plus, I don't think it would be too good for the foam behind the port.

After 24 hours in the 'Jacuzzi', a lot of button pressing and a day drying, all the buttons seem to finally pressing smooth.

Now a little silicon grease here and there I should be good to go!

That is good news. Glad it seems to have been resolved. I know I would not want to live without my UW Still (or UW video) camera so I am glad you will not have to.