Tec diver would rather go for a minimum of 40/50 lb DSMB.
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
Different places and boats have different procedures
Tec diver would rather go for a minimum of 40/50 lb DSMB.
Why?
If (...) you wish to have your SMB clearly visible by the surface watch, a certain volume seems mandatory to me.
This is something I was taught to do in a recent wreck/ deco procedures course, and I believe it's a required skill in the TDI manual. We did two dives a day for 5 days, and the second dive each day ended with practicing deploying the SMB for a controlled ascent to the first deco stop. It seemed pretty easy and safe if performed as I tried to describe it. If you imagined we were being dragged up by the SMB , I did a poor job describing it.Wow are you actually suggesting using an SMB as a buoyancy device during ascend? WHY?
What's the advantage of not just letting go of the SMB when you deploy it? I would always deploy an SMB when I'm a stable platform. This could be at the bottom, to release the smb and tie of to the wreck so I stay "attached" to the wreck during ascend, or at a specific depht (for example when you slow the ascend to minutes per 3m or when you make a gas switch) during a free drifting ascend; This way you arrive at that depth, stabilise yourself, and then deploy an SMB.
There is nothing hard to it, in fact it's very easy. Your method seems to me quite hard and has no benefits. You need to manage another bubble (next to your wing and drysuit) which is unnecessary and you are handling a partially inflated smb "pulling" you up while ascending which seems a bit risky. Care to go into detail about what the benefits of this approach would be?
By partially filling the smb with air from the bc (and holding on to it), you haven't changed your buoyancy at depth. The SMB floats a little above your head, with little or no line played out. Once we starting ascending it didn't seem very hard to maintain a proper rate, and the dive profiles from my computers seem to bear that out. Managing the bubble was little more than venting some gas every so often, and staying a bit heavy on the SMB. Letting it play out as we began to approach the stop didn't seem that much harder than launching it from a fixed depth. Did I hit every the first stop at exactly the right depth +/- 1 foot? No, not every time - hey, I'm new at this!
But I'm still learning, and am open to different ways to do things.
-Don
Interesting exercice.
Just two questions/remarks:
1. If you are correctly weighted, at the time you want to ascend, you sould have CLOSE TO ZERO air in your BCD. If you have neutral buyancy - as few divers do - you practically do not need to add air to your BCD in order to start the ascend. So were/how do you transfer air from your BCD to your DSMB?
I don't understand the point of the TDI exercise either(why not just shoot the bag from the 70' stop?), but this was presented in a tech course, so between deco gas and required reserves of back gas the diver is never going to have an empty wing, unless there's a big problem.