Lobster regs revisited?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

What does this mean:

"Amend current v-notch definitions by adopting a “zero-tolerance” definition in the Gulf of Maine Recreational Lobster Area (a "V" shaped notch at least ¼ inch and not greater than a ½ inch in depth and tapering to a sharp point in the flipper next to and to the right of the center flipper as viewed from the rear of the female lobster when the underside of
the lobster is down). The Southeastern Recreational Lobster Area would maintain the ASMFC v-notch definition that currently is in place for the recreational lobster fishery;"

Is this about what size the v-notches must be cut?

I like this one:

"8. A public petition to lower the lobster trap limit in state waters from 800 to 600"
 
https://www.shearwater.com/products/teric/

Back
Top Bottom