1Cave Ghost
Contributor
Somehow a part went missing in my MK25 reg.
I am trying to find a spacer part 10752102
Where can I get it?
I am trying to find a spacer part 10752102
Where can I get it?
Info Need an MK25 part
- Thread starter 1Cave Ghost
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
OP
1Cave Ghost
Contributor
Johnson outdoors will not even talk to me because I am not affiliated with a dive shop.
That said, I'd be surprised if at least one of the dealers in this region:
wouldn't help you if you established a relationship.
halocline
Contributor
You might send rsingler a PM. That part is basically a small disc that fits against the bottom of the HP seat and provides a flat surface for the external IP adjusting set screw. (You probably already know that) Just to make sure, you could remove the set screw (if you haven't already done this) and poke through the hole with a thin wood or plastic rod, like a barbecue skewer, just to make sure its not sitting in the seat retainer. If you can look through adjusting hole in the retainer and see daylight on the other side, it's not there. You can also check to make sure somehow it didn't get stuck to the bottom of the seat.
If you've done these things and it seems obvious to you, I apologize. It's just hard to imagine how that part could get lost unless someone assembled the reg without it. I guess that's at least theoretically possible, it doesn't seal anything but IP would be pretty high.
I have found that talking directly, in person, with the tech at some smaller shops (often also the owner) and demonstrating that I know what I'm doing has resulted in them being willing to sell me parts. But your luck might be different.
If you've done these things and it seems obvious to you, I apologize. It's just hard to imagine how that part could get lost unless someone assembled the reg without it. I guess that's at least theoretically possible, it doesn't seal anything but IP would be pretty high.
I have found that talking directly, in person, with the tech at some smaller shops (often also the owner) and demonstrating that I know what I'm doing has resulted in them being willing to sell me parts. But your luck might be different.
OP
1Cave Ghost
Contributor
Thanks for the replies. A found a local dive shop that has a ton of them in there service stock.
Similar threads
