Butleroutdoors
Registered
- Messages
- 13
- Reaction score
- 0
- # of dives
- 25 - 49
Good morning:
I recently purchased from ST a Oceanic Alpha 9 2nd stage reg, Alpha 9 Octo along with computer console and Inflator hose all on the SP-6 first stage.
The 2nd stage hose was connected to lower right port and the octo hose was connected to the upper right port on the SP-6. This results in the hoses crossing (as I keep the octo on the lower right front of the BCD), so I switched the locations.
Is there there a reason for this original configuration? Does it matter from a safety standpoint?
Thank you in advance for your advice.
I recently purchased from ST a Oceanic Alpha 9 2nd stage reg, Alpha 9 Octo along with computer console and Inflator hose all on the SP-6 first stage.
The 2nd stage hose was connected to lower right port and the octo hose was connected to the upper right port on the SP-6. This results in the hoses crossing (as I keep the octo on the lower right front of the BCD), so I switched the locations.
Is there there a reason for this original configuration? Does it matter from a safety standpoint?
Thank you in advance for your advice.