Reading Wireless Air Transmitter using Arduino

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I have not been here in almost a year but wow it's nice to see that you guys did pick up the torch and have figured out the details.

I look forward to seeing when someone gets a receiver made that can be dipped into the water and get readings from multiple transmitters.
Personally I feel like that would be a very useful device to have on board a dive boat. Even with limited range it opens up other possibilities like a BC mounted repeater that can amplify the signal. It would be briliant if the captain of the boat could actually monitor a whole group of divers.
 
This topic is out of my league but I got curious about the magnetic field and compasses that divers wear. Some googling led me to this: NFC and Compass discussion

The NFC field is very strong within a sphere of about 10 cm round the antenna, which is usually near the back of the phone (often it forms part of the battery), and falls off very quickly after that...
…even a fairly brief direct contact between your phone and a weak magnet such as a compass would be enough to demagnetise the compass (I don't think it would normally reverse the polarity but the compass just wouldn't settle). The solution is to turn off NFC when you aren't using it ..l

In a normal diving stance underwater the compass location (wrist mounted) is far away from the transmitter therefore nothing untoward is expected. But what happens if by chance on the boat a divers compass arm is touching the tank valve while he shuts it down and the transmitter is on? Now the compass is within 10cm of the magnetic field - is there a risk of the compass getting demagnetised and never settling thereafter, making it unreliable and useless?
 
This topic is out of my league but I got curious about the magnetic field and compasses that divers wear. Some googling led me to this: NFC and Compass discussion




In a normal diving stance underwater the compass location (wrist mounted) is far away from the transmitter therefore nothing untoward is expected. But what happens if by chance on the boat a divers compass arm is touching the tank valve while he shuts it down and the transmitter is on? Now the compass is within 10cm of the magnetic field - is there a risk of the compass getting demagnetised and never settling thereafter, making it unreliable and useless?
No. The NFC radiated field is not similar to the 38kHz radio transmission from the pressure transmitter.
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom